Auto Repair Shopvehicle Mover or Residential Property Vehicle Mover

Name: Auto Repair Shopvehicle Mover or Residential Property Vehicle Mover

Model Number:ICSP2015-1001

Description:

1.    This product is mainly used in the garagemoving the fault vehicles and property parking.

2.    It is very convenient, efficient, safe andcould be operated just by one person.

Specification:

1.     The front wheel on method: First, push themain car to the front of the vehicle and lower the hydraulic pressure tominimum. Second, open both sides of the adjusting rod and the front legs, pushthe main car into the chassis. Third, fix the front legs and adjusting rod,raise the main car and the car front wheels will leave the ground.

2.     The rear wheel on method: First, push thevice car to the wheel profile. Second, pull up thevice car switch to make the vice car and the ground is flat. Third, pushthe vice car under the rear wheel .Press the vice car using torque rod and therear wheel leave the ground after putting  down the switch.

3.     After lifting the car:

4.     Some cars’ rear wheels will notneed the vice car to move and it means you could just using the main car partsthat are OK. The max bear load is 2T.

Size:

1.    The main drag plate size:2050*800*50mm

2.    The main engine working conditionsize:2100*2050*135mm(Dragging plate from the ground up to 135mm)

3.     Vicecar size:900*480*270mm