Vehicle Dolly (Model B ) Operating Instructions

Time:2015-05-07 00:00:00

Vehicle Dolly (Model B )

Operating Instructions


news_pic12.jpg

Product Description:

This product is suitable for vehicle repair workshop and used for moving the repaired vehicles to replace the front wheel of the car in the workshop. It is required to keep the ground smooth and strong when using this product.


Product Structure and Function:

This product is mainly composed of 2pcs tire selector support a, b. 2pcs 40 × 40 telescopic tube of Support b inserted into the bracket 2 main support bar in a and could be telescopic movement,(as shown in Figure 1) could be adjusted 2pcs tire support in order to meet the needs of different distance between vehicles, tighten the fastening screw fixation of C.


news_pic13.jpg


The maximum load capacity:2Ton;


The maximum extensional dimension is 1.65m.


Method of use:

1. Using floor jack or auto lift to hold the car up about 50cm height.

2 .Place this product in lower position of vehicle tyre.

3.Loosen the fastening screws C, adjust the 2 tire selector support distance, keep the bar is under the tire. Tighten the fastening screws. Recommend tire inner gas emissions that will reduce the pressure of about 1/3 to make the vehicles use more secure. After moving the vehicle to the designated position in the workshop and then use the brake block of swivel caster on the support bar stop swivel caster in order to avoid the vehicle glide.


Diagram of Product Assembly:

news_pic14.jpg

Part

Description

Quantity 

Part 

Description

Quantity 

1

Tire Selector Support a

1

7

M10 Nut

 

16

2

Tire Selector Support b

1

8

M10 * 25 Bolts

 

16

3

Fastening Screw

2

9

Main Supporting Bar

1

4

The Closure Cap

4

10

40 x 40 Telescopic Bar

1

5

5 Inch Caster

2

11

Caster(with brake)

2

6

D10 Round Gasket

8

 

 


Copyright Yongkang Ice City Import & Export Co., Ltd

Sitemap Login Power by:Easthardware